RESEARCH ARTICLE
Hand tool handle size and shape determination based on hand measurements using a contour gauge
Ching-Yi Wang,
Deng-Chuan Cai,
Corresponding Author
Ching-Yi Wang
Department of Creative Product Design, Asia University, Taichung, Taiwan
Correspondence Ching-Yi Wang, Department of Creative Product Design, Asia University, No. 500, Lioufeng Rd., Wufeng, Taichung 41354, Taiwan.
Email: catincar@gmail.com
Search for more papers by this authorDeng-Chuan Cai
Department of Industrial Design, National Yunlin University of Science and Technology, Yunlin, Taiwan
Search for more papers by this authorChing-Yi Wang,
Deng-Chuan Cai,
Corresponding Author
Ching-Yi Wang
Department of Creative Product Design, Asia University, Taichung, Taiwan
Correspondence Ching-Yi Wang, Department of Creative Product Design, Asia University, No. 500, Lioufeng Rd., Wufeng, Taichung 41354, Taiwan.
Email: catincar@gmail.com
Search for more papers by this authorDeng-Chuan Cai
Department of Industrial Design, National Yunlin University of Science and Technology, Yunlin, Taiwan
Search for more papers by this authorAbstract
The purpose of this study is to provide a novel approach to tool handle design and development based on measurements of hand shape using a contour gauge. In general, traditional design techniques, designing based on anthropometric data, and derived mathematical models do not incorporate enough subject data to design a customized product. First, anthropometric measurements on the right hand of 60 participants were collected with a contour gauge to manufacture matching handles. A curved handle fitting the human hand was constructed with common computer-aided design software, and cylindrical handles and elliptical handles were added for comparison. All of the handles were used to record the participants' grip force to evaluate the operating efficiency of the handles. Finally, the participants completed a comfort-rating questionnaire. The results show that contours based on the hand provided the highest operating performance and the best overall comfort-rating compared to cylindrical handles and elliptical cylindrical handles. The newly developed handles in the grip force tasks have the highest push performance and the best comfort ratings compared to traditional cylindrical and elliptical handles. The developed handles could provide the hand tool industry information on developing and manufacturing many other similar handle designs (such as those for saws and electric screwdrivers).
REFERENCES
- Aldien, Y., Welcome, D. E., Rakheja, S., Dong, R., & Boileau, P.-E. (2005). Contact pressure distribution at hand-handle interface: Role of hand forces and handle size. International Journal of Industrial Ergonomics, 35, 267–286.
- Angst, F., Drerup, S., Werle, S., Herren, D. B., Simmen, B. R., & Goldhahn, J. (2010). Prediction of grip and key pinch strength in 978 healthy subjects. BMC Musculoskeletal Disorders, 11, 94.
- Ayoub, M. M., & Lo Presti, P. (1971). The diameter of an optimum size cylindrical handle by use of electromyography. Ergonomics, 4, 503–518.
- Barański, R., & Kozupa, A. (2014). Hand grip-EMG muscle response. Acoustic and Biomedical Engineering, 125, 7–10.
- Blackwell, J. R., Kornatz, K. W., & Heath, E. M. (1999). Effect of grip span on maximal grip force and fatigue of flexor digitorum superficialis. Applied Ergonomics, 30(5), 401–405.
- Cochran, D., & Riley, M. (1986). An evaluation of knife handle guarding. Human Factors, 28(3), 295–301.
- Das, B., Jongkol, P., & Ngui, S. (2005). Snap-on-handles for a non-powered hacksaw: An ergonomics evaluation, redesign and testing. Ergonomics, 48(1), 78–97.
- de Haan, A., Lodder, M. A. N., & Sargeant, A. J. (1989). Age related effects of fatigue and recovery from fatigue in rat medial gastrocnemius muscle. Quarterly Journal of Experimental Physiology, 74, 715–726.
- Dianat, I., Nedaei, M., & Nezami, M. A. M. (2015). The effects of tool handle shape on hand performance, usability and discomfort using masons' trowels. International Journal of Industrial Ergonomics, 45, 13–20.
- Dong, R. G., Sinsel, E. W., Welcome, D. E., Warren, C., Xu, X. S., McDowell, T. W., & Wu, J. Z. (2015). A review and evaluation of hand-arm coordinate systems for measuring vibration exposure. Biodynamic Responses, and Hand Forces. Safety and Health at Work, 6, 159–173.
- Dong, R. G., Wu, J. Z., Welcome, D. E., & McDowell, T. W. (2008). A new approach to characterize grip force applied to a cylindrical handle. Medical Engineering and Physics, 30, 20–33.
- Eikhout, S. M., Bronkhorst, R.E., & van derGrinten, M.P. (2001). Evaluation of a new scraper. Proceedings of the 45th HFES Congress, Minneapolis, MN, HFES, CD rom, 722-726.
- Ekşioğlu, M. (2004). Relative optimum grip span as a function of hand anthropometry. International Journal of Industrial Ergonomics, 34(1), 1–12.
- Garneau, C. J., & Parkinson, M. B. (2011). Optimization of product dimensions for discrete sizing applied to a tool handle. International Journal of Industrial Ergonomics, 42(1), 56–64.
- Groenesteijn, L., Eikhout, S. M., & Vink, P. (2004). One set of pliers for more tasks in installation work: The effects on (dis)comfort and productivity. Applied Ergonomics, 35(5), 485–492.
- Habes, D. J., & Grant, K. A. (1997). An electromyographic study of maximum torques and upper extremity muscle activity in simulated screwdriving tasks. International Journal of Industrial Ergonomics, 20, 339–346.
- Harih, G. (2013). Interdisciplinary approach to tool-handle design based on medical imaging. BioMed Research International, 2013, 1–8.
- Harih, G. (2014). Decision support system for generating ergonomic tool-handles. International Journal of Simulation Modelling, 13(1), 5–15.
- Harih, G., & Čretnik, A. (2013). Interdisciplinary approach to tool-handle design based on medical imaging. BioMed Research International, 2013, 159159.
- Harih, G., & Dolšak, B. (2013). Tool-handle design based on a digital human hand model. International Journal of Industrial Ergonomics, 43(4), 288–295.
- Harih, G., & Dolšak, B. (2014). Comparison of subjective comfort ratings between anatomically shaped and cylindrical handles. Applied Ergonomics, 45(4), 943–954.
- Harih, G., & Tada, M. (2015). Finite element evaluation of the effect of fingertip geometry on contact pressure during flat contact. International Journal for Numerical Methods in Biomedical Engineering, 31(6), 1–13.
- ISO 10819. (1996). Mechanical vibration and shock – hand–arm vibration – method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand. Geneva, Switzerland: International Organization for Standardization.
- ISO 8727. (1997). Mechanical vibration and shock – human exposure – biodynamic coordinate systems. Geneva, Switzerland: International Organization for Standardization.
- Janssen, I., Heymsfield, S., Wang, Z., & Ross, R. (2000). Skeletal muscle mass and distribution in 468 men and women aged 18-88 yr. Journal of Applied Physiology, 89(1), 81–88.
- Kaljun, J. (2014). Intelligent support for defining aesthetical, ergonomical and material properties of designed product. Tehnički vjesnik, 21(4), 835–842.
- Kalra, M., Rakheja, S., Marcotte, P., Dewangan, K. N., & Adewusi, S. (2015). Measurement of coupling forces at the power tool handle-hand interface. International Journal of Industrial Ergonomics, 50, 105–120.
- Kong, Y. K., & Freivalds, A. (2003). Evaluation of meat-hook handle shapes. International Journal of Industrial Ergonomics, 32, 13–23.
- Kong, Y. K., & Lowe, B. D. (2005). Optimal cylindrical handle diameter for grip force tasks. International Journal of Industrial Ergonomics, 35, 495–507.
- Konz, S. (1983). Work Design. Industrial Ergonomics. Columbus OH: Grid Publishing Inc.
- Kroemer, K., Kroemer, H., & Kroemer-Elbert, K. (1994). Ergonomics: How to design for ease and efficiency. Englewood Cliffs, NJ: Prentice Hall.
- Kuijt-Evers, L. F. M., Bosch, T., Huysmans, M. A., deLooze, M. P., & Vink, P. (2007). Association between objective and subjective measurements of comfort and discomfort in hand tools. Applied Ergonomics, 38, 643–654.
- Kuijt-Evers, L. F. M., Groenesteijn, L., deLooze, M. P., & Vink, P. (2004). Identifying factors of comfort in using hand tools. Applied Ergonomics, 35(6), 453–458.
- Kuijt-Evers, L. F. M., Twisk, J. W. R., Groenesteijn, L., deLooze, M. P., & Vink, P. (2005). Identifying predictors of comfort and discomfort in using hand tools. Ergonomics, 48(6), 692–702.
- Kwon, S., Bahn, S., Hee Ahn, S., Lee, Y., & Yun, M. (2016). A study on the relationships among hand muscles and form factors of large-screen curved mobile devices. International Journal of Industrial Ergonomics, 56, 17–24.
- Lemerle, P., Klinger, A., Cristalli, A., & Geuder, M. (2008). Application of pressure mapping techniques to measure push and gripping forces with precision. Ergonomics, 51(2), 168–191.
- Li, K. Y. (2003). Ergonomic evaluation of a fixture used for power driven wire-tying hand tools. International Journal of Industrial Ergonomics, 32, 71–79.
- Liao, K. H. (2016). Hand grip strength in low, medium, and high body mass index males and females. Middle East Journal of Rehabilitation and Health Studies, 3, 1–7.
10.17795/mejrh-33860 Google Scholar
- Lin, J. H., McGorry, R. W., Chang, C.C., & Dempsey, P. G. (2007). Effects of user experience, working posture and joint hardness on powered nutrunner torque reactions. Ergonomics, 50(6), 859–876.
- McCormick, M. I. (1994). Comparison of field methods for measuring surface topography and their associations with a tropical reef fish assemblage. Marine Ecology Progress Series, 112, 87–96.
- McGee, C., Hoehn, A., Hoenshell, C., McIlrath, S., Sterling, H., & Swan, H. (2019). Age- and gender-stratified adult myometric reference values of isometric intrinsic hand strength. Journal of Hand Therapy, 1–8. (In press).
- McHugh, M. L. (2011). Multiple comparison analysis testing in ANOVA. Biochemia Medicu, 21(3), 203–209.
- Moore, A., Wells, R., & Ranney, D. (1991). Quantifying exposure in occupational manual tasks with cumulative trauma disorder potential. Ergonomics, 34(12), 1433–1453.
- Motamedzade, M., Choobineh, A., Mououdi, M. A., & Arghami, S. (2007). Ergonomic design of carpet weaving hand tools. International Journal of Industrial Ergonomics, 37, 581–587.
- Oh, S., & Radwin, R. G. (1993). Pistol grip power tool handle and trigger size effects on grip exertions and operator preference. Human Factors, 35(3), 551–569.
- Putz-Anderson, V. (1988). Cumulative Trauma Disorders: A Manual for Musculoskeletal Diseases of the Upper Limb. London, UK: Taylor and Francis.
- Radwin, R. G., Vanbergeijk, E., & Armstrong, T. J. (1989). Muscle response to pneumatic tool torque reaction force. Ergonomics, 32(6), 655–673.
- Rempel, D. M., Harrison, R. J., & Barnhart, S. (1992). Work-related cumulative trauma disorders of the upper extremity. Journal of the American Medical Association, 267(6), 838–842.
- Rigby, L. (1973). Why do people drop things? Quality Progress, 6, 16–19.
- Rossi, J., Berton, E., Grélot, L., Barla, C., & Vigouroux, L. (2012). Characterisation of forces exerted by the entire hand during the power grip: Effect of the handle diameter. Ergonomics, 55(6), 682–692.
- Sanders, M. S., & McCormick, E. J. (1993). Human Factors in Engineering and Design. New York: McGraw-Hill.
- Semmler, J. G., Tucker, K. J., Allen, T. J., & Proske, U. (2007). Eccentric exercise increases EMG amplitude and force fluctuations during submaximal contractions of elbow flexor muscles. Journal of Applied Physiology, 103(3), 979–989.
- Seo, N. J., & Armstrong, T. J. (2008). Investigation of grip force, normal force, contact area, hand size, and handle size for cylindrical handles. Human Factors, 50(5), 734–744.
- Seo, N. J., & Armstrong, T. J. (2011). Effect of elliptical handle shape on grasping strategies, grip force distribution, and twisting ability. Ergonomics, 54(10), 961–970.
- van Dieen, J. H., Boke, B., Oosterhuis, W., & Toussaint, H. M. (1996). The influence of torque and velocity on erector spinae muscle fatigue and its relationship to changes of electromyogram spectrum density. European Journal of Applied Physiology and Occupational Physiology, 72(4), 310–315.
- Vink, P., & vanEijk, D. J. (2007). The effect of a participative product design process on user performance. Safety Science, 45, 567–577.
- Wang, M. J., Wang, M. Y., & Lin, Y. C. (2002). The Anthropometric Database Manual of Taiwan. Hsinchu, Taiwan: Ergonomics Society of Taiwan.
- Welcome, D. E., Rakheja, S., Dong, R. G., Wu, J. Z., & Schopper, A. W. (2004). Relationship between the grip, push and contact forces between the hand and a tool handle. International Journal of Industrial Ergonomics, 34(6), 507–518.
