Journal list menu
Export Citations
COVER PICTURE
Free Access
free
Cover Picture: Structural Concrete S1/2021
- Pages: E1
- First Published: 25 February 2021
ISSUE INFORMATION
Free Access
free
Issue Information: Structural Concrete S1/2021
- Pages: E2-E6
- First Published: 25 February 2021
EDITORIAL
TECHNICAL PAPERS
RECYCLED AND SPECIAL AGGREGATES
no
Performance analysis of recycled aggregate concrete with chemical admixture
- Pages: E8-E21
- First Published: 06 February 2020
no
Optimizing mix proportion of recycled aggregate concrete by readjusting the aggregate gradation
- Pages: E22-E32
- First Published: 09 February 2020
no
Mesoscale fracture analysis of recycled aggregate concrete based on digital image processing technique
- Pages: E33-E47
- First Published: 16 February 2020
no
Fracture performance of concrete incorporating different levels of recycled coarse aggregate
- Pages: E48-E57
- First Published: 01 March 2020
no
Carbon emission analyses of concretes made with recycled materials considering CO2 uptake through carbonation absorption
- Pages: E58-E73
- First Published: 31 March 2020
no
The influence of aging on the fracture characteristics of recycled aggregate concrete through three methods
- Pages: E74-E93
- First Published: 22 July 2020
no
Applicability of models provided by technical standards to estimate the static modulus of elasticity of concretes produced with recycled coarse aggregates
- Pages: E94-E104
- First Published: 03 June 2020
no
Influence of brick dust, stone dust, and recycled fine aggregate on properties of natural and recycled aggregate concrete
- Pages: E105-E120
- First Published: 12 August 2020
no
Influence of mixing approaches on strength and durability properties of treated recycled aggregate concrete
- Pages: E121-E142
- First Published: 04 September 2020
no
Evaluation of modulus of elasticity for normal and high strength concrete with granite and calc-granulite aggregate
- Pages: E143-E151
- First Published: 16 July 2020
Open Access
oa
Infra lightweight concrete: A decade of investigation (a review)
- Pages: E152-E168
- First Published: 17 August 2020
no
Development and analysis of highly workable high-strength heavyweight concrete using magnetite aggregates
- Pages: E169-E182
- First Published: 11 February 2020
no
Sustainable use of sugarcane bagasse ash and marble slurry dust in crusher sand based concrete
- Pages: E183-E192
- First Published: 16 July 2020
no
Experimental and numerical investigation on axial compression of reinforced concrete columns made from recycled coarse and fine aggregates
- Pages: E193-E206
- First Published: 05 October 2020
no
Tackling the issues of self-compacting concrete containing high volume of waste glass aggregate by zeolite
- Pages: E207-E227
- First Published: 29 October 2020
no
The role of glass powder in concrete with respect to its engineering performances using two closely different particle sizes
- Pages: E228-E244
- First Published: 27 January 2020
no
Gradation effect of cleaned quarry waste to improve size distributions of concrete constituents
- Pages: E245-E256
- First Published: 29 April 2020
no
The effects of synthetic wollastonite developed with calcite and quartz on high performance mortars
- Pages: E257-E272
- First Published: 28 April 2020
no
Influence of calcined diatomite content and elevated temperatures on the properties of high strength mortars produced with basalt sand
- Pages: E273-E290
- First Published: 08 June 2020
no
Effect of incorporating iron-filing waste on the properties of silica fume blended cement paste
- Pages: E291-E299
- First Published: 30 July 2020
no
The utilization of walnut shells as a partial replacement of sand in mortar mixes
- Pages: E300-E307
- First Published: 17 August 2020
no
An example of harnessing crushed ceramic pots for the production of watertight concrete
- Pages: E308-E314
- First Published: 11 August 2020
GEOPOLYMER CONCRETE
no
Influence of various factors on properties of geopolymer paste: A comparative study
- Pages: E315-E331
- First Published: 07 October 2020
no
Investigation of the properties of two different slag-based geopolymer concretes exposed to freeze–thaw cycles
- Pages: E332-E340
- First Published: 30 December 2019
no
Siliceous fly ash and blast furnace slag based geopolymer concrete under ambient temperature curing condition
- Pages: E341-E351
- First Published: 14 January 2020
no
Influence of nano SiO2 and nano CaCO3 particles on strength, workability, and microstructural properties of fly ash-based geopolymer
- Pages: E352-E367
- First Published: 06 May 2020
no
Sodium hydroxide effect on the mechanical properties of flyash-slag based geopolymer concrete
- Pages: E368-E379
- First Published: 07 July 2020
no
Influence of SiO2, Al2O3, CaO, and Na2O on the elevated temperature performance of alkali-activated treated palm oil fuel ash-based mortar
- Pages: E380-E399
- First Published: 30 September 2020
no
Sulfuric acid resistance of alkali/slag activated silico-manganese fume-based mortars
- Pages: E400-E414
- First Published: 03 April 2020
no
Sodium sulfate resistance of alkali/slag activated silico–manganese fume-based composites
- Pages: E415-E429
- First Published: 08 May 2020
no
Application of response surface methodology to optimize alkali-activated slag mortar with limestone powder and glass powder
- Pages: E430-E441
- First Published: 09 September 2020
no
Experimental optimization of metakaolin and nanosilica composite for geopolymer concrete paver blocks
- Pages: E442-E451
- First Published: 26 August 2020
no
Effect of cement additive on physical and mechanical properties of high calcium fly ash geopolymer mortars
- Pages: E452-E465
- First Published: 19 August 2020
ADDITIONS AND ADMIXTURES
no
Partial replacement of cement by ground granulated blast furnace slag and silica fume in two-stage concrete (preplaced aggregate concrete)
- Pages: E466-E473
- First Published: 03 March 2020
no
Influence of nano silica on compressive strength, durability, and microstructure of high-volume slag and high-volume slag–fly ash blended concretes
- Pages: E474-E487
- First Published: 21 September 2020
no
Development of a waste-based eco-friendly structural mortar without Portland cement and natural sand
- Pages: E488-E500
- First Published: 28 May 2020
no
Suitable pretreatment process for rice husk ash towards dosage optimization and its effect on properties of cementitious mortar
- Pages: E501-E513
- First Published: 26 August 2020
no
Effect of marble slurry as a partial substitution of ordinary Portland cement in lean concrete mixes
- Pages: E514-E527
- First Published: 13 September 2020
no
Influences of different stone powders on pervious concrete strength
- Pages: E528-E534
- First Published: 21 August 2020
no
Chromatic design and application of restoration mortars on smooth surfaces of white and GRAY concrete
- Pages: E535-E548
- First Published: 05 September 2020
no
Creep of reinforced high-strength concrete-containing industrial by-products silica fume and slag
- Pages: E549-E562
- First Published: 23 February 2020
no
Prediction of the basic creep of concrete with high substitution of Portland cement by mineral additions at early age
- Pages: E563-E580
- First Published: 06 November 2020
no
Strategies to mitigate shrinkage in an intermediate strength self-compacting concrete
- Pages: E581-E595
- First Published: 25 February 2020
Open Access
oa
The effect of shrinkage reducing admixtures on drying shrinkage, autogenous deformation, and early age stress development of concrete
- Pages: E596-E606
- First Published: 07 September 2020
no
Effect of main and side chain length change of polycarboxylate-ether-based water-reducing admixtures on the fresh state and mechanical properties of cementitious systems
- Pages: E607-E618
- First Published: 01 October 2020
no
Effect of false set related anomalies on rheological properties of cement paste mixtures in the presence of high range water reducing admixture
- Pages: E619-E633
- First Published: 14 August 2020
MECHANICAL PROPERTIES
no
Concrete compressive strength: From material characterization to a structural value
- Pages: E634-E654
- First Published: 24 July 2020
no
The influence of casting position and disturbance induced by reinforcement on the structural concrete strength
- Pages: E655-E682
- First Published: 09 May 2020
Open Access
oa
Compressive strength of core specimens drilled from concrete test cylinders
- Pages: E683-E695
- First Published: 17 October 2020
no
Transition coefficients between compressive strengths of samples with different shape and size in mass concrete and use of weight maturity method in dam construction
- Pages: E696-E709
- First Published: 05 May 2020
no
Effect of coarse-aggregate shape on strength of hydraulic concrete
- Pages: E710-E719
- First Published: 07 August 2020
no
Investigations on mechanical and thermal properties of concrete with different proportions of insulation aggregates
- Pages: E720-E731
- First Published: 04 September 2020
no
Prediction of early compressive strength of mortars at different curing temperature and relative humidity by a modified maturity method
- Pages: E732-E744
- First Published: 18 August 2020
no
Influence of curing temperature on the mechanical properties and microstructure of limestone powder mass concrete
- Pages: E745-E755
- First Published: 26 August 2020
no
The effect of water to cement ratio and age on the mechanical properties of cement mortar and concrete made of micro-nano bubbles without adding any admixtures
- Pages: E756-E768
- First Published: 30 December 2019
no
Mechanical properties of high strength concrete made with pyrophyllite aggregates exposed to high temperature
- Pages: E769-E778
- First Published: 21 January 2020
no
A hybrid optimized learning-based compressive performance of concrete prediction using GBMO-ANFIS classifier and genetic algorithm reduction
- Pages: E779-E799
- First Published: 29 November 2019
no
Prediction of compressive strength and ultrasonic pulse velocity of admixtured concrete using tree model M5P
- Pages: E800-E814
- First Published: 02 June 2020
no
Rate effect on the stress–strain behavior of concrete under uniaxial tensile stress
- Pages: E815-E830
- First Published: 13 August 2020
no
Mesoscopic numerical simulation of fracture process and failure mechanism of cement mortar
- Pages: E831-E842
- First Published: 04 July 2020
no
Study on strength parameters of plain cement concrete added with tamarind kernel powder
- Pages: E843-E850
- First Published: 27 July 2020
Open Access
oa
Energetic damage analysis regarding the fatigue of concrete
- Pages: E851-E859
- First Published: 27 October 2020
Open Access
oa
Probabilistic modeling of reinforcing bar fatigue on the basis of surface topography data
- Pages: E860-E867
- First Published: 07 August 2020
no
Influence of curing age on the mechanical properties of fly ash concrete exposed to elevated temperature
- Pages: E868-E883
- First Published: 07 September 2020
no
Experimental investigation on compressive strength of concrete with sticky rice pulp at different ages (the experiment of concrete with sticky rice pulp)
- Pages: E884-E897
- First Published: 22 September 2020
no
Effect of super absorbent polymer on microstructural and mechanical properties of concrete blends using granite pulver
- Pages: E898-E915
- First Published: 07 January 2020
no
Considering the effect of the randomness of concrete strength and relative humidity on concrete creep
- Pages: E916-E930
- First Published: 06 October 2020
DURABILITY
no
Fractional-order freezing-and-thawing damage model for hydraulic concrete subjected to variable temperature processes
- Pages: E931-E943
- First Published: 02 March 2020
no
Coupled effects of sustained compressive loading and freeze–thaw cycles on water penetration into concrete
- Pages: E944-E954
- First Published: 27 February 2020
no
Effect of the dosage of MWCNT's on deterioration resistant of concrete subjected to combined freeze–thaw cycles and sulfate attack
- Pages: E955-E965
- First Published: 13 July 2020
no
Effects of strain rate, temperature and freeze–thaw cycle on the mechanical properties of cement mortar composite specimen
- Pages: E966-E975
- First Published: 10 September 2020
Open Access
oa
Preparation of novel and durable concrete skin
- Pages: E976-E984
- First Published: 03 March 2020
no
An investigation of key mechanical and durability properties of coconut shell concrete with partial replacement of fly ash
- Pages: E985-E996
- First Published: 03 March 2020
no
Workability, mechanical, and durability properties of self-compacting concrete using the treated wastewater
- Pages: E997-E1008
- First Published: 07 April 2020
no
Evaluation of concrete cover depth for green concretes exposed to carbonation
- Pages: E1009-E1021
- First Published: 14 September 2020
no
Probabilistic modeling of leakage through tension-cracked reinforced concrete water retaining structures considering autogenous self-sealing
- Pages: E1022-E1035
- First Published: 13 October 2020
no
Mechanical and durability studies on high-volume fly-ash concrete
- Pages: E1036-E1049
- First Published: 16 September 2020
no
Resistance of hydrophobic concrete with different moisture contents to advanced freeze–thaw cycles
- Pages: E1050-E1061
- First Published: 02 October 2020
no
Transport properties of surface layers from full-scale reinforced concrete member
- Pages: E1062-E1073
- First Published: 23 June 2020
no
Thermal damage and its controlling methods of high-speed railway steam-cured concrete: A review
- Pages: E1074-E1092
- First Published: 24 October 2020
no
Influence of super absorbent polymer on mechanical, rheological, durability, and microstructural properties of self-compacting concrete using non-biodegradable granite pulver
- Pages: E1093-E1116
- First Published: 24 September 2020